BeerGun Stainless Bottle Filler

$76.95 -- One-handed intuitive operation. Everything that touches the beer is stainless steel. Low foaming. The BeerGunTM comes with everything pictured here - a 10ft length of 3/16" ID hose and a brush for cleaning the inside of the tubes.

Purchase BeerGun Stainless Bottle Filler

Let’s face it, we all love the simplicity and convenience of kegging, but hate the inconvenience of bottling for transporting our beer. We either deal with complicated counter-pressure (CP) fillers or put up with the oxygenation and foaming of filling from a tap. Or just give up on bottling altogether. Until now that is! The BeerGunTM is a revolutionary new bottle filler that eliminates the complication and time-consuming operation and cleaning of traditional counter pressure (CP) bottle fillers used to fill bottles from kegs. The Quiescent Flow TechnologySM of the BeerGunTM eliminates the complication of CP fillers, while maintaining the primary function – purging a bottle with CO2 (no oxygen pick-up) and filling it with minimal foaming and carbonation loss. The other main feature is the intuitively obvious operation and very simple sanitation procedure. Couple this with the auto fill level and ability to fill any depth bottle without modification makes this filler a clear standout. And since it’s from Blichmann Engineering you know it’s high quality, well engineered, and easy to use! Instead of pressurizing a bottle to keg pressure like CP fillers do to reduce foaming – with all its complicated valving and cumbersome operation - this filler gradually reduces the beer from keg pressure to atmospheric pressure with little turbulence. The result is a consistent bottle fill with little foaming and no oxygen pick-up. Foaming is caused predominantly by turbulence and sudden changes in pressure. The unique design of the BeerGunTM eliminates the need to pressurize the bottle by providing a non-throttling, quick-acting valve placed at the BOTTOM of the filler stem, and a beer delivery system that is very low in turbulence. All current designs use a valve at the TOP of the filler. Placing the valve at the bottom not only allows the valve to be quickly immersed in the beer, further reducing pressure change and turbulence, it keeps the stem full of beer at all times. Traditional fillers, or filling from a tap with a hose, forces the beer down an empty tube each time, kicking up foam along the way. And since the beer is sealed in the filler stem when the BeerGunTM is removed from the bottle, it automatically provides a consistent bottle fill level when the stem is removed! These features, coupled with a CO2 jacketing tube for bottle purging, and ergonomic valve actuators, means filling a bottle is faster, intuitively obvious, more accurate, and easier than ever before! And since a pressurizing stopper isn’t required, you can fill any depth bottle without buying different stem lengths or adding plastic hose extensions. With the BeerGunTM, filling a bottle is as simple as pushing a valve for CO2 purge, and then pulling a trigger for beer. It’s that simple!!

Purchase BeerGun Stainless Bottle Filler

SKU: BGun

Other products in the category Beer Brewing / Beer Kegs & Kegging:

Complete Draft Kegging System - Ball Lock -- The whole draft beer setup! with Keg (used, with new o-rings), new Regulator, new CO2 Bottle (empty) new hoses & fittings too! Remember, we deduct 10% on any order over $250...Click on name for details:

5 Gallon Cornelius Keg (used, Ball Lock ) -- Used 5 gallon soda kegs. Each keg has been pressure tested to ensure a good seal. O-rings that are currently installed are not new, so a new o-ring kit is included. Measures approx 26" high (with the in and out fittings connected), and 8.5" in diameter

NEW - 3 Gallon Cornelius Keg -- Brand NEW 3 Gallon Stainless Steel Cornelius kegs .These measure approx 16.5" high, and 8" in diameter. HARD TO FIND ITEMS

O-Ring Set for Cornelius Kegs -- All the o-rings for your keg. Large ring for the lid, two for the poppets, 2 for dip tubes.

Co2 Regulator Replacement Washer Kit -- New! Long-life brass washer combo replaces the hard-fiber washer supplied with our Co2 regulators. These screw directly into your Co2 tank fitting (between tank and regulator).

Co2 Regulator With Turn Valve -- New QUALITY regulator. Two gages--one for bottle pressure, one for line pressure. Comes with internal check valve. The best pressure regulator out there for kegging systems.

High Pressure Gage 0-2000 psi -- Replacement gage, shows CO2 bottle pressure. Available in both right and left hand thread. Please determine which you need prior to ordering. Measures from 0-2000 psi, with a red "Order Gas" zone, below 500 psi.

Low (Line) Pressure Gage, 0-30 psi -- Replacement gage for the gas line (low pressure) side of regulator. Right hand thread only, 0-30 psi. Dial face is 2" in diameter.

New 5 Lb. Aluminum Co2 Tank -- A NEW, lightweight aluminum CO2 tank.

CO2 Tank Gasket - Set of 2 Gaskets -- Set of 2. This is the hard plastic gasket that goes between your CO2 tank and your regulator.

Cornelius Keg / Demijohn Brush -- Extra large brush for cleaning out those kegs and demijohns. Rugged brush that is 36" long and has 6" diameter bristles. (corne keg not included)

Quick Disconnect-Ball In Fitting -- Gas in fitting for ball lock corney kegs. Barbed end.

Quick Disconnect Fitting- In W/Ftgs -- Gas-in fitting for ball lock cornelius kegs. This one has a threaded connection for easy change.

Quick Disconnect-Ball Out Fitting -- Beer out fitting for ball lock cornelius kegs.

Quick Disconnect Ball/Out W/Ftgs -- Beer out fitting for ball-lock style kegs. Allows easy interchange of fittings.

Pin Lock Fitting-Beer Out (3-Pin) -- For "Coke" style cornelius kegs. The beer-out fitting has 3 pins on the connector.

Pin Lock Gas In Fitting (2 Pin) -- For "Coke" style cornelius kegs. The gas-in fitting has 2 pins.

Pin Lock Fitting Gas-In (with 1/4" removable barb) -- For "Coke" style cornelius kegs. The gas-in fitting has 2 pins on the connector. Removable 1/4" barb for easy line cleaning, or removed for use with portable keg charger.

Quick Disconnect Pin/Beer Out W/Ftgs -- For "Coke" style cornelius kegs.

Quick Disconnect PinLock Gas-In W/Ftgs -- For "Coke" style cornelius kegs.

Plastic Tapper Spigot -- The fun end of the setup. Also called a cobrahead or picnic faucet. Hand-held plastic faucet for dispensing beer, soda pop etc.

1/4" Id Gas Line (Thick Wall) - Per Foot" -- Recommended for all gas (CO2) lines. Thick wall for secure, easy clamping.

3/16" Beer Line, Thick Wall Per Foot" -- Recommended, even tho it's a tight fit, to provide some restriction on your beer line. This allows you to use a higher keg pressure and keeps your beer carbonated. Thick wall tubing for secure, easy clamping.

Cornelius Kegging System Setup & Maintenance - Leaflet -- The name says it all. Details of kegging for the home brewer. By Homebrew Heaven. 6 pgs.

Beer Line Cleaning Kit - Complete! -- Nothing ruins a fine beer like a dirty or contaminated beer line or faucet. This kit includes Foxx Superflush Cleaner, Pump, Bottle, Beer Faucet Brush and Faucet Wrench

Chrome Gage Protector (Gage Cage) -- Bolts on to your Regulator and protects your gages from bumps. Will save you $$$ in broken gages. Worth having if you take your kegging system out for parties.

Double Draft Beer Tower -NEW LOWER PRICE!! -- Complete with all parts and ready to install �Includes faucets �Includes 5ft - 3/16" tubing with tailpieces, hex nuts and washers �Styrofoam insulated stainless steel barrel (not pvc like others) to prevent sweating. Brass Finish (extra) is shown.

Single Draft Tower -- Same as above, but with one spigot. Finish is chrome. (not pvc tubing!)

Portable Keg Charger -- NOW with 2 Bonus refill cartridges (LIMITED TIME) Portable CO2 Charger for your cornelius keg! Charges with easy, one-hand operation, using inexpensive 16 grm CO2 cartridges. Valve trigger allows precise control of CO2 gas. Keeps beer fresh.

Optional Accessory Kit for BeerGun -- This optional accessory kit provides everything you need to get your BeerGun up and running! Click on product name for more information

Thru Wall Shank W/ Chrome Faucet -- NEW LOWER PRICE!! Spiff up your refrigerator with a tap on the outside. Add MORE taps! Build your own kegerator or jockey box.

1/4" Barbed Tailpiece -- tailpiece for the end of your faucet shank or sankey tap

3/16" Barbed Tailpiece -- tailpiece for the end of your faucet shank or sankey tap

Beer Faucet Wrench -- Used for tightening/loosening beer taps

Beer Washer -- Beer washer for those sankey taps and faucet shanks

Carbonator -- Used to carbonate your plastic 2 Liter Soda-Pop bottles using a CO2 bottle and Cornelius keg ball-lock gas in fitting. This may be done overnight. Lower temperatures, higher pressures, and more agitation will increase the carbonation level.

Drip Tray - Stainless Steel -- Brushed stainless steel tray, back and grating. Two sizes available; 4" deep x 6" wide (no drain) OR 6" deep x 10" wide (with drain). Both come with pre-drilled holes for easy installation onto your 'fridge, kegerator, wall...you name it.

Hex Nut -- This nut connects to the end of our faucet shank and also is connected to the ends of a sankey tap

In-Line Check Valve (Gas) -- Used to prevent backflow into regulator/beer lines. Used with some kegging systems and kegerators.

Keg Faucet Tap (Handi-Tap) -- A handy little item. Directly connects a spigot to your corney keg. For a completely portable kegging system, consider getting a Keg Charger!

Keg Lube (Petro-Gel) For Keg O-Rings -- Apply a thin film to o-rings to prevent leaks and make removal of keg fittings easy. Food grade grease.

Modular Gas Distr. Valve (1 way) -- 1-way manifold w/barb for use in a 1 keg system. Add on manifolds (w/out gas in barb, sku F83) can be added for more kegs. Simply move the barb from the single manifold to the last add-on in your system. Accepts 1/4" or 5/16" gas tubing.

Plastic "T" Fitting For Gas or Beer Line -- Used to split a gas or beer line for multiple kegs.

Pony Pump For Sanke Keg -- Handy tap for picnics (and KEGGERS!). Don't forget to invite Ralph, the webmaster of Homebrew Heaven. He likes beer, too! Just pump in some air, and out comes fun...

Refrigerator and Freezer Temperature Controller -- A temperature control unit that can be used anywhere you have a 120volt outlet. Simply plug your 'fridge or freezer into this controller and put the sensor inside. Set the temp...that's it! One-Year Limited Warranty.

Sanke Beer Tap (Coupler) for 15.5 Gal Kegs -- For 15.5 Gal Sanke style kegs. Requires CO2 bottle, regulator, beer line, gas line and tap.

Sanke Keg Picnic Tap (Airpump) -- Great for parties. Fits 15.5 gallon Sankey type fitting.

Stainless Steel "Cross" Fitting For Gas Line -- Used to split the gas line for running multiple kegs.

Stainless Steel "T" Fitting For Gas or Beer Line -- Used to split a gas or beer line for multiple kegs in your home refrigerator or kegerator.

Stainless Steel Carbonation Stone -- Carbonates your kegged beer in minutes. By connecting this stone to a hose and your CO2 "in" line, the bubbles come up thru your beer as a super-fine mist, and easily go into solution.. Active part of the stone is about 2 inches long.