Therminator Backflush Hose Assembly

$16.99 -- Optional back-flush hose accessory is used to flush the wort side of the chiller after use. This hose assembly is an 18" length of 1/2" ID braided vinyl hose with a garden hose thread on one end, and a QuickConnector on the other.

Purchase Therminator Backflush Hose Assembly

Both fittings are factory assembled to the hose with Oetiker clamps.

Purchase Therminator Backflush Hose Assembly

Other products in the category Beer Brewing / Wort Chillers:

Thrumometer -- A new inline thermometer (food grade aluminum) that measures temperature as your wort flows THROUGH it. Reads from 58-88 deg. F. Super fast to respond. Fits 5/16" and 3/8" ID tubing. Mirror smooth interior is easy to clean.

Wort Chiller - Indoor -- Same as the Outdoor Wort Chiller (C44) except that it has flexible tubing that allows connection to a kitchen sink. The water OUT side is also flexible tubing. Cools 5 gallons of boiling wort down to 70-80 deg. F. in about 15 minutes. 25ft coil

Wort Chiller - Outdoor -- Cools 5 gallons of boiling wort down to 70-80 deg. F. in about 15 minutes. Immerse in boiling wort to sterilize, and then start the water flow. If you are a serious brewer, sooner or later, you'll want a wort chiller. 25ft coil

Faucet Adapter -- For connection of Indoor Wort Chillers (C44A) or Carboy and Bottle Washers (F33) to common kitchen faucet threads. Includes a screen which acts like an aerator so the adapter can be left in place if desired.

Super Wort Chiller,Outdoor -- This model is made from 50 feet of copper tubing. Best chiller for 10 gallon and larger batches. Originally designed for 15.5 gal converted kegs. Please let us know in the "Comment Section" how tall your pot is so we can bend chiller to fit!

The Therminator -- NEW! The Therminator-the fastest way to chill your wort to yeast pitching temperature & get your fermentation off to a quick, bacteria-free start. Brazed plate heat exchanger does the trick! Click on name for more details...Pre-order rqrd; allow 2-3 wks

Therminator Connector Kit -- 1/2" NPT x 1/2"or 3/8 barbed connection fittings for the "wort in" and "wort out" male hose fittings on the Therminator. The cooling water connections require Two regular garden hoses for the larger "water in" and "water out" male threaded fittings